626/Capella 2,0i-16 Valve (GD model)    Modified with forged pistons, ported head and a Garrett Turbo, Trim 60 compressor housing and ,48 turbine housing.360 degree bearing. 8x300cc/min injectors and 2 PCM´s controlled by a Map sensor + Mass airflow meter. The max output is 320 HP at 7000 RPM and 420 Nm at 5000 RPM. 0-1000m 24,66 secs with a bad start and approx 240km/h end speed.

This RX7 (SA) has had mods with a Turbo II engine with increase boost pressure (15 psi. 1 Bar)  The transmissionis a modified 1986 FC RX7 n/a. Flywheel and clutch is from Racing Beat,California. 315 HP Last 1/4 mile run clocked 13.2 secs.  End speed was 183 km/h.Top speed approx 270 km/h.